Description
Beautifully finished, the Wharfedale Elysian 1 speaker cabinets are designed to enhance the acoustic output of the drivers and provide a piece of furniture of which the owner can be justly proud. Handcrafted veneers are enhanced by true piano finish lacquers, hand-polished to six levels of depth.
Operating in a two-way configuration, Elysian 1 is also fitted with a custom, glass fibre matrix cone bass unit. Terminated with a highly flexible rubber surround and driven by a specially developed low-distortion motor system, the 180mm (7”) bass units are capable of reaching down below 49Hz, revealing the full body and impact of percussion, stringed and wind instruments with detail and depth that other standmount speaker options just cannot reach.
The performance of ELYSIAN 1 is enhanced with an advanced version of Wharfedale’s signature slot-loaded port. Christened SLPP (Slot-Loaded Profiled Port), it ensures that the rear output of the bass units is not wasted. Instead, the lowest frequency energy is vented to a slot at the base of the speaker, specially profiled to equalise the high internal pressure to the low pressure in the room. This reduces the distortion that is typical of bass reflex systems and increases the port’s efficiency. In addition, because the air is dispersed uniformly in the room, the speakers are less fussy about placement.
In combination, the bass units and SLPP bass reflex system provide the massive foundation upon which the rest of the musical performance sits, letting you feel as well as hear the full impact of thunderous low-frequency information. High overall system sensitivity allows any amplifier to reveal the full dynamic range of the music fed to it, without strain or limitation.
The drivers’ output is combined via a sophisticated crossover network, fine-tuned over hundreds of hours of listening tests to ensure a seamless blend between the drive units.
Of particular note is the phase consistency across the driver output, permitting a wide range of seating positions and encouraging the power response to be highly linear throughout the listening room. Only the highest grade, acoustically transparent components are used throughout the crossover network, ensuring all the musical detail is heard with nothing held back.
Specification
General description
2-way standmount speaker
Enclosure type
bass reflex
Transducer complement
2-way
Bass driver
7″ (180mm) coated fibre glass matrix cone
Midrange driver
Treble driver
27 x 90mm AMT
AV shield
No
Sensitivity (2.83V @ 1m)
89dB
Recommended amplifier power
25-175W
Peak SPL
108dB
Nominal impedance
4Ω (compatible 8Ω)
Minimum impedance
3.8Ω
Frequency response(+/-3dB)
49Hz ~ 22kHz
Bass extension(-6dB)
44Hz
Crossover frequency
2.6kHz
Cabinet Volume(in litres)
21.6L
Dimensions (mm)
Height (on plinth): 490mm
Width: 263mm
Depth (with terminals): (285+30)mm
Carton size
690 x 445 x 625mm
Net weight
15kg/pcs
Gross weight
33.2kg/ctn
Finish
Black /Walnut/White Piano Finish
Standard accessories
rubber feet
Please view our full catalogue of products
Please view our online shop of products
