Description
The McIntosh C22 is a 2 channel preamplifier that contains a power consumption of 50W with a frequency response of +0, -0.5dB from 20Hz to 20kHz / +0, -3dB from 15Hz to 100kHz.
The C22 Mk V has two balanced inputs, three unbalanced inputs, one Moving Coil and one Moving Magnet phono inputs, for a total of seven inputs. There are two pairs each of balanced and unbalanced output connections; the two outputs allow sending signals to two separate power amplifiers.
Bypassable bass and treble tone controls are located on the front panel and can be adjusted in 2dB increments via rotary knobs. Impedance and capacitance for the phono inputs can also be adjusted via separate rotary knobs. In addition to setting the listening level, the volume knob can also be used to adjust the relative volume balance between the left and right audio channels.
Specifications
-Number of Channels: 2
-Total Harmonic Distortion: 0.08%
-Frequency Response: +0, -0.5dB from 20Hz to 20kHz
: +0, -3dB from 15Hz to 100kHz
-Maximum Volts Out (Balanced / Unbalanced): 16V RMS / 8V RMS
-Sensitivity High Level (Balanced / Unbalanced): 900mV / 450mV
-Sensitivity Phono (Moving Coil): 0.45mV
-Sensitivity Phono (Moving Magnet): 4.5mV
-Signal To Noise Ratio (High Level): 100dB
-Signal To Noise Ratio (Moving Coil): 75dB
-Signal To Noise Ratio (Moving Magnet): 75dB
-Voltage Gain (High Level): 15dB
-Voltage Gain (Moving Coil): 60dB
-Voltage Gain (Moving Magnet): 40dB
-Input Impedance (Balanced / Unbalanced): 44K ohm, 22K ohm
Control
-Tone Controls: Bass and Treble
-Tone Bypass: Yes
-Input Assign: No
-RS232 Control Input: No
-Power Control Output: 2 Main, 2 Switched
-Rear Panel Data Port: 5
-Rear Panel IR Sensor Input: Yes
Weight and Dimensions
-Unit Dimensions (W x H x D): 44.45cm x 15.24cm x 45.72cm
-Unit Weight: 11.3kg
-Shipping Weight: 18.8kg
