Description
Designed for larger dedicated home cinemas with an acoustically transparent screen, the MX-30 will deliver your favourite movie soundtracks with supreme definition and accuracy, right through the picture and into your seat. Larger bass drivers and compression high frequency drivers provide an extended frequency response at higher sound pressure levels.
- Behind screen cinema quality speakers
- Easy to install
- Krix Infinite Baffle Wall
Featuring commercial cinema components, the Krix MX-30 provides a crisp, clear, realistic sound, with such power and precision it will make your hair stand on end.
Created for larger home cinemas measuring five to fourteen metres long, the MX-30 features five modules, all of which are the same height and slim-line depth for easy installation into one cavity. The front baffle of each module is covered with an acoustic absorbent material to absorb any sound reflecting off the back of the screen or the room itself. This assists greatly with the acoustic treatment of the room to ensure better intelligibility and overall sound performance.
The main speakers utilise a single 380mm, high stiffness, paper cone mid-bass driver with a 75mm voice coil for increased linear excursion, and a powerful vented magnet assembly designed to lower distortion. You’ll hear a pin drop and a booming soundtrack crescendo with equal clarity.
High frequencies are handled by the Krix patented 90 by 40 degree short throw horn, driven by a high frequency compression driver. Each subwoofer also contains a massive 455mm driver with 100mm voice coil, dual spider and vented magnet assembly.
With every aspect scrutinised to deliver the most faithful reproduction of your movie soundtrack, the Krix MX-30 will allow you to truly feel the on-screen action.
For the ultimate cinema experience at home, play it through Krix.
LCR SPEAKER MODULES
Frequency Range
38Hz-16kHz in room response
Power Handling
100 – 700 Watts RMS recommended amplifier power
Sensitivity
98dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Configuration
2-way
Enclosure Type
Bass reflex, front vented
Low Frequency Driver
Single 380mm (15″) high stiffness paper cone driver with 75mm (3″) voice coil of optimal length for increased linear excursion, wound on high temperature apical former and powerful vented magnet assembly designed for low distortion
High Frequency Driver
A Krix patented designed 90º x 40º short throw horn with 25mm (1”) throat, 35mm (1.4”) compression driver, ferrite magnet, coated titanium diaphragm and polyimide surround
Input Terminals
Gold plated spring terminals
Dimensions
1220mm high x 450mm wide x 335mm deep (2865mm wide including subwoofer modules)
Weight
48kg each
SUBWOOFER MODULES
Frequency Range
25Hz-200Hz in room response
Power Handling
200 – 1400 Watts RMS recommended amplifier power
Sensitivity
100dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Enclosure Type
Bass reflex, front vented
Low Frequency Driver
Single 455mm (18”) paper cone driver. 100mm (4”) edge-wound copper voice coil, dual spider assembly and vented magnet assembly
Input Terminals
High level gold plated spring terminals
Dimensions
1220mm high x 750mm wide x 335mm deep (2865mm wide including LCR modules)
Weight
65kg each
SYSTEM RECOMMENDATIONS
Recommended Room Depth
5m – 14m
Min. Screen Size 16:9
135″ (2989mm x 1681mm)
Minimum Screen Size 21:9
130″ (3035mm x 1301mm)
