Description
Designed for dedicated home cinemas, the Megaphonix In-Room delivers effortless power and controlled dispersion to achieve the impact of a real cinema experience.
- Impact and dynamics for a real home cinema experience
- High sensitivity, very low distortion
- Precise pattern control
The Megaphonix In-Room are designed specifically for in room use in dedicated home cinemas. Using high power handling and high sensitivity drivers, these speakers will deliver all the impact and dynamics you need for a real home cinema experience, without the need for a big wattage power amplifier.
The 255mm bass driver has a 50mm voice coil and has been developed to offer low harmonic distortion, especially in the critical midband. The paper cone and surround of the bass driver have been developed to provide the smoothest possible response. The high frequency drive unit is a specially-damped, high power, 26mm doped fabric dome tweeter, and is coupled with Krix’s proprietary waveguide to provide consistently-maintained optimum dispersion of 90 degrees horizontal and 40 degrees vertical over the entire working bandwidth.
The combined high frequency response of the Megaphonix In-Room provides an exceptionally smooth and well-controlled sound – a new benchmark in loudspeaker reproduction.
The enclosure is braced and critically damped, with proprietary Krix rubber feet to improve acoustic isolation on hard or soft surfaces.
The Megaphonix In-Room a member of a five-speaker family, allowing you to combine it with main or surround speakers for a connected, clear and smooth sound experience.
For the ultimate cinema experience at home, play it through Krix.
Frequency Range
40Hz-20kHz in room response
Power Handling
50-250 Watts RMS recommended amplifier power
Sensitivity
95dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Configuration
2-way
Enclosure Type
Bass reflex, front vented
Dimensions
939mm high x 315mm wide x 205mm deep
Low Frequency Driver
Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated magnet assembly and copper shorting ring for low distortion
High Frequency Driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide
Crossover Point
1.8kHz
Input Terminals
High current terminals featuring 5mm hole to accept up to 10 AWG cable
Weight
19kg each
